Operating Specifications |
|
| Flow range | 0.5 to 50 gpm |
| Pressure range |
Wired Non-wired |
| Temperature range | Up to 150°F (66°C) |
Electrical Specifications | |
| Solenoid power | 24 VAC 50/60 cycle |
| 0.43 amp | (10.4 VA) inrush current |
| 0.25 amp | (6.0 VA) holding current |
Ball Valve |
|
|---|---|
|
| |
| Pressure
Loss (PSI) MVA®-100 |
|
FLOW-gpm |
HEADLOSS-psi |
| 0.50 | 1.8 |
| 1.00 | 2.5 |
| 5.00 | 2.0 |
| 10.00 | 2.1 |
| 20.00 | 3.6 |
| 30.00 | 7.1 |
| The foregoing figures are based on tests run on a 6-valve Multi-Valve Assembly, then calculated to reflect single-valve loss.
Shaded area designates recommended operating range. Performance results are derived from tests conducted by an independent testing laboratory, Center for Irrigation Technology (CIT), California State University, Fresno, California. | |
The MVA®-100 PRO Series Offers Many Convenient Features |
|
|
|
|
Multi-Valve Assembly:
|
||||
Valve assembly consisting of 1 inch valves, flow control, union ball valve, pre-wired controller terminal harness, 24 VAC solenoid, 200 psi, pre-assembled in a 12 inch valve box, bolt-down lid |
||||
U.S. Patents 6,460,563, D402,635 |
The MVA®-100-06-PRO-W is shown next to the components of a typical 6-valve unit. Two boxes are required for a standard setup. However, the MVA® allows installation of up to 6 valves in one standard valve box. |
|||
| The PRO-W series MVA®-100 is the top-of-the-line model, featuring pre-installed valves, a built-in ball valve, pre-wired electrical outlets, and a wire connector terminal block controller hookup, all pretested and ready for quick, simple installation. | ||||
|
MVA®-100-PRO |
8103 |
|||
|
8104 |
||||
|
8105 |
||||
|
8106 |
||||
Multi-Valve Assembly:
|
||||
Valve assembly consisting of 1 inch valves, flow control, union ball valve, 24 VAC solenoid, 200 psi, pre-assembled in a 12 inch valve box, bolt-down lid |
||||
|
The non-wired model provides all of the features of the PRO series, with the exception of the electrical system. | |||
|
MVA®-100-PRO |
8113 |
|||
|
8114 |
||||
|
8115 |
||||
|
8116 |
||||
| The non-wired model provides all of the features of the PRO series, with the exception of the electrical system. | ||||
| Operating
Specifications | Electrical
Specifications | Ball
Valve Pressure Loss MVA® | How to Specify The MVA-100 PRO Series Offers Many Convenient Features |
||||
|
|
||||
How to Specify |
||||
| Assembly | AGV | Angle Globe Valve | ||
| DVA | Dual Valve Assembly | |||
|
|
||||
| Valve Size | 100 | 1 inch | ||
|
|
||||
| Valves | 4 | Number of Valves | ||
|
|
||||
| Series | UTL | Utility | ||
| PRO | Professional | |||
| PRO-N | Professional, Non-Wired | |||
|
|
||||
| Optional Features | FLO | Flow Control | ||
| N | No Box | |||
|
|
||||
| Lid Color | P | Purple | ||
|
|
||||
| U.S. Patents 6,460,563, D402,635 | ||||
|
|
||||
| Home
| About Olson Irrigation
Systems |Product Index
| Product Specifications
| Distribution Network
| Distribution Network
| Contact us at sales@olsonirrigation.com NEXT |
||||