The Vibra-Clean® Emitter is available in button and barbed outlet models

The Vibra-Clean®
Family

Single-Outlet Emitters
Direct Outlet
"Button"
Barbed
Outlet
Pipe Cap

The Olson
Vibra-Clean® Principle

Technically, building a good pressure-compensating emitter has always been extremely difficult. All compensating devices prior to the
Vibra-Clean® principle used a labyrinth-disk-and-slot or just a disk-and-slot. Each of these designs had one or more of the following weaknesses: large physical size, initial surge, poor uniformity or high pressure shut down.
The Vibra-Clean® design solves each of these problems.

The patented silicone cylinder is surgeless even at the startup, reaching full flow performance at 3.5 psi. Consistent by design and produced to close tolerances, the uniformity is unmatched by any other emitter. The Vibra-Clean® is a dramatic technical innovation, yet practical when controlling flow over long runs or uneven terrain.


*

Vibra-Clean® Pressure-Compensating Emitters







Vibra-Clean® Single Outlet,
Low Profile "Button" Emitter

1802 0.50 gph Green

1803 0.75 gph Yellow

1804 1.00 gph Blue
1808 2.00 gph Red
The Vibra-Clean® Button Emitter may be pre-installed at the factory in quantities placed on over 100,000 feet of tubing.

Vibra-Clean® Single Outlet,
Barbed Outlet Emitter

1812 0.50 gph Green

1813 0.75 gph Yellow

1814 1.00 gph Blue
1818 2.00 gph Red
The Vibra-Clean® Barbed Emitter may be pre-installed at the factory in quantities placed on over 100,000 feet of tubing.

Vibra-Clean® Single Outlet,
1/2 Inch Female Pipe Thread,
"Pipe Cap" Emitter

1822 0.50 gph Green

1823 0.75 gph Yellow

1824 1.00 gph Blue
1828 2.00 gph Red
U.S. Patents 4,589,595; 4,627,573; 4,392,616; 5,054,690; other patents pending.
Home | About Olson Irrigation Systems |Product Index | Product Specifications | Distribution Network | Distribution Network | Contact us at sales@olsonirrigation.com
NEXT